10
During first use
IMPORTANT: When you use the wine cabinet for the first time
or restart the appliance after it has been turned off for a long
time, there could be a few degrees variance between the
temperature you select and the one indicated on the LED
display. This is normal and it is due to the length of activation
time. Once the wine cabinet has been running for a few hours
everything will be back to normal.
o
When you first switch on the appliance, the compressor will run
continuously until the wine cabinet reaches a cool enough
temperature.
o
During this period of time, you should try not to open the door
frequently or place bottles inside of the appliance.
o
If the unit is switched off or unplugged, you must allow at least 5
minutes before restarting the appliance or reconnecting it to
your mains supply.
Switching on the appliance and setting the temperature
o
To switch the appliance on, press the ON / OFF control button
(1) for 5 seconds.
o
The temperature setting for the appliance is adjustable within
the range of 5°C - 22°C / 40°F / 71°F.
o
When you press the temperature plus (4) or minus (5) button
for the first time, the LED display will show the factory default
temperature setting of 12°C / 54°F.
o
Use the temperature plus (4) and minus (5) buttons to set the
desired internal temperature.
o
The temperature will increase by 1°C or 1°F if you touch the plus
button (4) once and will decrease by the same amount if you
press the minus button (5) once.
o
When you set a new temperature, the display will show the
previous temperature for 5 minutes, before showing the actual
temperature. During this time, the cabinet temperature will
adjust accordingly.
o
To view the set temperature in the wine cabinet, press the plus
(4) or minus (5) button. The display will flash the temperature
for 5 seconds.
