Baumatic BY9006SS, Руководство пользователя

Страница: 24 / 32

24
o
Check that the weight of the door is fully supported on the
hinges.
o
Lower the door and raise the hinge clips, then return them away
from you and back to their starting positions.
o
Check that the seal is in place then close the door. Make sure
that the inner face of the door meets and shuts against the seal
all around.
o
Take care not to dislodge the hinge locking
system when removing the door, as the
hinge mechanism has a strong spring.
o
Do not immerse the door in water at any
time.
INSTALLATION
The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o
UK Regulations and Safety Standards or their European
Norm Replacements.
o
Building Regulations (issued by the Department of the
Environment).
o
Building Standards (issued by the Scottish Development
Department).
o
IEE Wiring Regulations.
o
Electricity At Work Regulations.
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o
This appliance should be wired into a 20 A double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. The spur
outlet must still be accessible even when your oven is located in
its housing.