Changing a light bulb
IMPORTANT: BEFORE ATTEMPTING TO CHANGE
A LIGHT BULB, YOU MUST ENSURE THAT YOU
HAVE DISCONNECTED THE COOKER HOOD FROM
YOUR MAINS SUPPLY.
o
Remove the grease filters (as
described on page 11).
o
Prior to touching the light bulbs ensure that they have cooled
down.
o
Find the bulb that requires replacement, you will find it located in
the light fixture which is inside the exposed section of the
canopy.
o
Use a screwdriver to remove the glass cover that sits over the
bulb. Unclip the light bulb that needs to be replaced and insert a
new G4 20W (max) bulb. Then replace the glass cover.
o
IMPORTANT:
Defective bulbs should be replaced immediately.
o
If the lights still do not work, make sure that the bulbs are fitted
properly into their housings before you call for technical
assistance.
o
Refit the grease filters.
12
