Baumatic BWC885BGL, Инструкция по эксплуатации, Страница: 24 / 32

24
o
The seal must adhere properly all the way around the door.
o
If the seal is not adhering to the cabinet properly, then you
should either:-
a) Use a warm damp cloth and manipulate the seal until it does
adhere to the cabinet properly, all the way around the door.
or
b) Use a hair dryer on its lowest heat setting and lightly heat the
areas of the door seal that are not adhering correctly. The heat
will make the seal more pliable and this will allow you to
manipulate the seal into the correct position.
IMPORTANT: DO NOT HEAT THE DOOR SEAL ON ANYTHING BUT
THE LOWEST HEAT SETTING, OR HEAT THE SEAL FOR A LONG
PERIOD OF TIME. OTHERWISE DAMAGE MAY BE CAUSED TO
THE DOOR SEAL, WHICH WOULD NOT BE RECTIFIED UNDER
THE GUARANTEE FREE OF CHARGE.
IMPORTANT: WHEN YOU HAVE REVERSED THE DOOR OF THE
APPLIANCE, IF YOU HAVE PLACED THE APPLIANCE ON ITS
BACK, YOU MUST WAIT FOR 8 HOURS BEFORE SWITCHING THE
APPLIANCE BACK ON.
Troubleshooting
IMPORTANT: If your wine cooler appears not to be
operating properly, before contacting the Customer
Care Department, please refer to the checklist
below.
PROBLEM POSSIBLE CAUSE
The wine cabinet will not operate. The appliance is not plugged in.
The appliance is turned off.
The circuit breaker tripped or a fuse has
blown.
The wine cabinet is not cold enough. Check the temperature setting.
The external environment may require a
lower temperature setting.
The door is opened too frequently.
The door is not closed completely.
The door gasket does not seal properly.
The appliance automatically turns on and
off frequently. The room temperature is hotter than
normal.
A large amount of contents have been
added to the wine cabinet.
The door is opened too frequently.
The door is not closed completely.
The temperature control is not set
correctly.