Baumatic BW1000W, Инструкция по эксплуатации

Страница: 15 / 20

15
When it is lit,indicates that the machine is switched on and that the door
locking system is activated.
In normal washing machines it goes out at the end of each programme and
door lock is not activated.
In washing-drying machines it stays on at the end of each programme and door
lock not activated.
L- Pilot lamp
R- 550/1000-1200-1300 rpm push-button
When activated "button IN", it makes the wash cycle of the synthetic and wool
programs stop during the last rinse with the drum full of water. This operation
is advisable to prevent creasing in certain fabric which need to be drip dried.
To end the cycle, press the button again "button OUT".
X- ON/OFF push-button
When activated "button IN", the spin is eliminated from all the programs
of the machine. This operation is necessary for certain types of delicate fabrics.
C- No spin push-button
When it is not operated "button OUT" the machine will automatically carry
o u t t h e p r og r a m m e s f o r c o t t o n w i t h a c o n s i d e r a bl e s av i n g o f wa t e r.
It is only advisable when the load is equal to or less than half load. With bigger
loads it is advisable to operate this button "button IN" so that greater rinse
eff iciency is obtained.
A- Rinse and hold push-button
In washing machines with automatic drying, never press this button.
Selects the spin speed of the last minutes of the cotton prog rammes.
Button OUT : the spin speed is 1000-1200-1300 rpm.
Button IN : the spin speed is 550 rpm.
Once the adequate programme has been selected,the washing machine can be
started by pressing this button "IN" and it will automatically carry out all the
chosen functions until the end of the programme. (Stop position). When the
p u s h - b u t t o n i s p r e s s e d " O U T " , t h e m a c h i n e w i l l n o t w o r k .
Y- Extra rinse push-button
When activated (button IN), the machine automatically runs the programm
with a considerable water saving. Recommended only when the load is less
than half load.
M- Half load push-button
Never press for wool and synthetics programs.
When this button is pressed the drying function is not operate.