background image

Using a specialist ceramic hob cleaner 
 

It is possible to purchase specialist ceramic hob cleaner/conditioner. 
 
You should follow the instructions given by the manufacturer of the 
specialist ceramic hob cleaner. You should ensure that it is suitable for 
use on your appliance. 
 

Installation 

 

The installation must be carried out by a suitably 
qualified person, in accordance with the current 
version of the following. 
 

o

 

UK Regulations and Safety Standards or their European 
Norm Replacements. 

o

 

Building Regulations 

(issued by the Department of the 

Environment). 

o

 

Building Standards

 (issued by the Scottish Development 

Department). 

o

 

IEE Wiring Regulations.

 

o

 

Electricity At Work Regulations.

 

 
Positioning 
 

The adjacent furniture must be able to withstand a 
minimum temperature rise of 85°C above the ambient 
temperature of the room it is located in, during 
periods of use. 

 

This appliance is classified as Class 3 and therefore is to be built into a 
kitchen unit (depending on size) or 600 mm worktop, providing the 
following minimum distances are allowed: 
 

o

 

700 mm between the hob surface and the underside of any 
horizontal surface above it. 

 

o

 

50 mm clearance around the appliance and between the hob 
surface and any combustible materials. 

 

 
 
 
 
 
 
 
 
 

 

21

Содержание BTC2.1SS

































Отзывы: