background image

IMPORTANT: If your appliance appears not to be 
operating correctly, then you should disconnect it 
from your mains supply and then contact the 
Baumatic Service Department on telephone 
number (0118) 933 6911. 
 
DO NOT ATTEMPT TO REPAIR THE APPLIANCE 
YOURSELF. 

 
 

Please note that if an engineer is asked to attend whilst the product is 
under guarantee and finds that the problem is not the result of an 
appliance fault, then you may be liable for the cost of the call out 
charge. 
 

The appliance must be accessible for the engineer to perform 
any necessary repair. If your appliance is installed in such a 
way that an engineer is concerned that damage will be caused 
to the appliance or your kitchen, then he will not complete a 
repair.  
 
This includes situations where appliances have been tiled in, 
sealed in with sealant, have wooden obstructions placed in 
front of the appliance, like plinths. Or any installation other 
than the one specified by Baumatic Ltd. has been completed. 

 
Please refer to the conditions of guarantee that appear on the 
warranty card that you receive with the appliance when it is delivered. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

24

Get user manuals: 

See SafeManuals.com

 

 

Содержание BT7.3BGL





























Отзывы: