background image

 

1

7

 
 

 

 

If something has gone wrong with your Cooker Hood, checking 

against this chart might keep you from having to call for service. 

 

 

 

Symptom Solution 

The cooker hood will not start! 

 

Check that the hood is connected  

      to the electricity supply. 

 
 

 

Check that the fan speed control is  

      set properly. 

 

The cooker hood is not working 

effectively! 

 

 

The fan speed is not set high enough.  

 

 

The grease filter is dirty. 

 

 

The kitchen is not ventilated well  

      enough. 

 

 

If the hood is set for recirculation,  

  check that the carbon filters have not    

expired. 

 

 

If the hood is set for extraction, check 

      that the ducting and outlets are not 
      blocked. 

 

The cooker hood has switched off  

during operation! 

 

The safety cut-out device has been 

      tripped. 

 

 

Turn off the hob and then wait for the 

device to reset.  

 

Note that if you have installed your  

      cooker hood too low, this will happen.

     If  it happens frequently, it will be          

damaged. 

 

 

 
 

 

 

Troubleshooting 

Содержание BT08.6ME






















Отзывы: