Baumatic BSO616SS, Инструкция по эксплуатации, Страница: 11 / 36

11
nitial set-up of your oven I
Selecting manual operation mode
After your appliance is connected to your mains supply for the first
time (or after a power-cut) the numbers on the timer display will flash.
Before you can select a cooking function or set a temperature, you
seconds. The oven in use symbol (8) will light in the
first
re the oven is in manual operation mode (as outlined
plus (11) and
al
will stop flashing and the oven is ready to use.
nction
re that any windows in the room are left open
o remain in the room whilst the burning
ld leave the oven on maximum setting for 30 – 40
either a sponge or soft cloth. No abrasive
cleaners should be used.
must set the appliance into “manual operation” mode.
o
To select manual operation mode, press the program button (12)
for three
display.
Setting the time of day
After your appliance is connected to your mains supply for the
time, you must set the time of day before you can use the oven.
Make su
o
above).
o
Press the program button (12) once to set the time of day. Whilst
the decimal point symbol (9) is flashing, use the
minus (13) buttons to set the correct time of day.
o
When the correct time of day is shown on the LED display, release
the plus and minus buttons and wait a few seconds. The decim
point symbol (9)
Before first use
o
To remove any residue from the oven that may have been left from
the manufacturing process, you should select the fan oven fu
and set the thermostat to its maximum temperature setting.
o
It is perfectly normal for a smell to be produced during this process.
You should make su
o
during this process.
It is advisable for you not t
o
off process is taking place.
You shou
o
minutes.
o
After the oven cavity has cooled, it should then be cleaned with
warm soapy water, using