Baumatic BSCS45-ANZ, Инструкция по установке и эксплуатации

Страница: 10 / 40

8
EN
Basic settings
Initial Settings
After your steam oven is first plugged in or after a
power failure, the clock display will flash to
indicate that the time shown is not correct.
The oven will not operate until the clock, the water
hardness parameter and the Calibration is set.
To set the clock and the water hardness
parameter value proceed as described in the
following chapters.
Setting the clock
1 3 : 3 0
1,3,5
2,4
To set the clock, proceed as follows:
1. Press the Clock key. The hour numbers will
start to flash (not necessary if your Steam oven
is first plugged in or after a power failure).
2. Press the “ + ” and “ – ” to set the correct hour
value.
3. Press again the Clock key to set the minutes.
The minute numbers will start to flash.
4. Press the “ + ” and “ – ” to set the correct minute
value.
5. To finish, press the Clock key again.
Hiding/Displaying the Clock
If the clock display disturbs you, you can hide it by
pressing the
Clock setting key for 3 seconds. The dots
that separate the hours and minutes will flash but the
rest of the clock display will be hidden.
If you want to see the clock display again, press the
Clock setting key again for 3 seconds.
Water Hardness setting
The appliance features a system that automatically
indicates when it is time to descale.
The system can be optimised for households with very
soft water (also through using a water softening
appliance) and very hard water, by changing the user
settings to the relevant range of water hardness (see
table below).
To set the water hardness parameter, proceed as
follows:
1. Press the Descale key. The hardness number will
start to flash on the Descale display (not necessary
if your Steam oven is first plugged in or after a
power failure).
2. Press the “ + ” and “ – ” to set the correct water
hardness parameter value, according to the below
table.
3. Press the Descale key to set the parameter. The
Descale display switches off.
Type
Water hardness
Display
Ca + Mg
(ppm)
English deg.
[°eH]
French deg.
[°dF]
German deg.
[°dH]
Soft water 0 to 150 0 to 11 0 to 15 0 to 8 1
Medium water 151 to 350 12 to 25 16 to 35 9 to 20 2
Hard water 501 to 500 26 to 35 36 to 50 21 to 28 3