Baumatic BO670SS, Инструкция по эксплуатации

Страница: 34 / 44

34
outlet must still be accessible even when your oven is located in
its housing.
o
To connect the oven power cord, loosen and remove the cover
on the terminal block, in order to gain access to the contacts
inside. Make the connection, securing the cord in place with the
cable clamp provided and then immediately close the terminal
block cover again.
o
If you have to change the oven power cord, the earthing
(yellow/green) conductor must always be 10 mm longer than the
line conductors.
o
Care must be taken to ensure that the temperature of the mains
supply cable does not exceed 50°C.
o
If the mains supply cable is damaged, then it must be replaced
by an appropriate replacement which can be obtained from the
Baumatic Spares Department.
Installing the oven into the kitchen cabinet
Positioning the appliance
o
Ensure that the aperture
that you will be fitting
the oven into is of the
size given in the above
diagram.
o
The oven must be fitted
into an oven housing
with the ventilation cut-
outs shown in the
“Ventilation
requirements” section on
the next page.
o
Ensure that the rear panel of the furniture housing unit has been
removed.