Baumatic BMEH32E, Инструкция по использованию и установке

Страница: 9 / 24

9
Locking the cooktop
functions The whole appliance can be locked using the key (B), in order to prevent any
unintentional use. The function also serves as a child safety device. (B
1
) indicates
that the safety lock function has been enabled.
It will still be enabled when the cook top is turned on again.
As long as the safety lock function is enabled, any action on the keys has no effect.
Turning on and off
Touch the key (A).
The control is enabled: the setting level indicators (E) read
“0” .
The next step must be carried out within 10 seconds, otherwise the appliance
goes off automatically.
Turning on the burner
After touching the key (A), a burner must be selected within 10 seconds as follows:
▪ Touch (D) and (C) keys for the burner required.
▪ Adjust the setting from 1 to 9 by means of the (D) and (C) keys.
▪ The (D) and (C) keys have a repeat function: pressing and holding one of these
keys induces an increase or decrease in the setting value of one unit.
▪ If the selected cooking zone will be switched ON by means of the (C) key, the cooking
zone starts at the maximum setting “9“.
When setting “0” is reached, there will be no further setting changed.
Turning off the burner
▪ The burner must be on.
▪ Bring the setting down to “ 0 ” by means of the (C) key. After 3 seconds, the burner
goes off automatically.
▪
If the cooking zone is “hot” “0” is displayed alternatively with “H”
Turning off the burner instantly:
▪ The burner concerned must be on.
▪ If you touch the (D) and (C) keys simultaneously, the burner goes off immediately.
▪
If the cooking zone is “hot” “0” is displayed alternatively with “H”.
Residual heat indicator As long as the temperature of the burner remains high enough to cause injury, the
display corresponding to the burner shows the “H” symbol (residual heat)
alternatively with “0” symbol. This indication only disappears when there is no longer
any danger (at 60°C).
To save energy, turn off the burner in advance, in order to exploit the residual heat.
The residual heat indicator “
H ” is lost in the event of a mains power cut lasting more
than 3 seconds.
Turning off the cooktop The cook top can be turned off at any time by means of the key (A).
The display shows a “ H ” as long as the temperature remains above 60°C.
Dual-circuit burners
Some burners can be equipped with a second circuit: for instance, the burner is
composed of a central disk and an outer ring. You can turn on the central disk alone
or both elements. This enables you to adapt the heated area to the size of the
saucepan you are using.
Turning on a dual-circuit burner
▪ Select the required power setting (from 1 to 9) with the keys (D) and (C).
▪ Turn on the second circuit by means of the key (F).
(F
1
) relating to the burner concerned comes on; the second circuit comes on together
with the first.
Turning off the burner’s second circuit
▪ The dual-circuit burner must be on.
▪ Touch the key (F).
(F
1
) goes off and the second circuit on burner also goes off.
Safety cut-out If one or more burners are accidentally left on, the control automatically turns them
off after a certain time has elapsed. The table below indicates the time interval, which
depends on the power level setting.