Baumatic BHS320.55SS, Инструкция по эксплуатации

Страница: 16 / 24

o
IMPORTANT: There are ventilation
holes around the outside of the hob.
YOU MUST ensure that these holes are
not blocked by the work top, when you
put the hob into position (see drawing
opposite).
o
Carefully turn the hob upside down and
place it on a cushioned mat.
o
The supplied brackets need to be fitted to
each of the four corners on the underside of
the hob.
o
Place a bracket onto each corner, ensuring that the outer hole
lines up with the hole on the corner of the hob.
o
Fasten the bracket to the corner of the hob with a screw.
o
Place the long screw into the fixing hole on the outer edge of the
bracket but do not fully tighten.
o
Carefully turn the hob back over and then gently lower it into the
aperture hole that you have cut out.
o
When the hob is correctly positioned, tighten the long screws to
fix the hob securely in the aperture hole. These screws MUST
be securely tightened.
1. Worktop
2. Screw
3. Bracket
4. Hob
5. Seal
16