Baumatic BHG642R, Инструкция по эксплуатации

Страница: 22 / 28

22
then reassemble the hob.
rdance with the latest edition of the
I.E.E. Regulations and in compliance with Baumatic’s
Before that the supply voltage
marked on the rating plate corresponds with your mains supply
o
Cable type: H05 RRF 3 core x 0.75 mm³ (Type RR-F <HAR>
th this product.
the mains supply cable is damaged, then it must be replaced by an
rtment.
o
Open the box of the supply board.
e cable.
o
The “green-yellow” earth wire must be connected to the terminal
o
Reconnect the gas tap, perform a gas soundness test and
Electrical connection
This appliance must be installed by a qualified
person in acco
instructions.
connecting the appliance, make sure
voltage.
marked).
o
The mains supply cable is supplied wi
Replacing the mains supply cable
If
appropriate replacement which can be obtained from the Baumatic
Spares Depa
The mains supply cable should be replaced in accordance with the
following instructions:
o
Switch the appliance off at your mains supply.
o
Unscrew the clamp fixing th
o
Replace the cable with one of the same length and in accordance
with the specification given above.
marked . It must be about 10 mm longer than the live and
neutral wires.
e connected to the terminal
marked with letter (N) - the live wire must be connected to the
ith letter (L).
o
The “blue” neutral wire must b
terminal marked w