Baumatic BHC925SS, Инструкция по эксплуатации

Страница: 28 / 36

o
IMPORTANT: Do not use a silicon sealant to seal the appliance
against the cut-out. This will make it difficult to remove the hob
from the aperture in future, particularly if it needs to be
serviced.
(B)
Fixing bracket
(C) Screw
o
Use the fixing bracket that is appropriate for your thickness of
worktop.
o
Place a fixing bracket (B) over the hole in each corner of the
underneath of the hob. Then place a screw (C) through the hole
and fixing bracket (B) . Tighten the screws partially, so that the
fixing brackets stay in place. IMPORTANT: Do not tighten the
screws fully.
o
Carefully turn the hob back over
and then gently lower it into the
aperture hole that you have cut
out.
o
On the underneath of the hob,
locate the fixing brackets
(B) and
turn them so that they locate on
the underneath of the worktop
and the hob.
o
Fully tighten the screws (C) to secure the hob into position.
28