Baumatic BFLW75, Инструкция по эксплуатации

Страница: 20 / 44

20
o
The delay start time on the display informs you in how many hours
the wash program will begin.
1) Use the program selection dial (1) to select the desired cycle.
2) You can adjust the water level (3) , temperature (4) and spin speed
(5) by pressing the appropriate buttons. You can also add a pre-
wash and an extra rinse by pressing the function button (8) .
3) Once the required cycle has been set, press the delay start button
(7). Repeatedly press this button to set the length of time which
you wish to pass before the washing cycle begins.
4) Press the start / pause button (2) and the machine will enter
standby mode. The cycle will automatically begin when the delay
start time is reached.
Setting a single wash
o
You can choose from the following single cycles: “Wash”, “Drain”,
“Drain and Spin” and “Rinse and Spin”.
1) Use the program selection dial (1) to choose one of these cycles.
Set the required spin speed or “No-Spin” option accordingly.
2) Press the start / pause button (2) to begin the program.
Manual soaking
1)
Load the laundry into the washing machine drum
2) Put the detergent into the drawer according to the manufacturer’s
instructions.
3) Use the program selection dial (1) to select the required wash
cycle. Press the start / pause button (2) to begin the cycle.
4) After approximately 10 minutes have passed, press the start /
pause button
(2) again to pause the cycle. The clothes are then
able to soak in the water for your chosen length of time. Press the
start / pause button
(2) to continue the wash cycle.