Baumatic BF17, Руководство пользователя

Страница: 21 / 28

o
IMPORTANT: Do not use a silicon sealant to seal the appliance
against the aperture. This will make it difficult to remove the hob
from the aperture in future, particularly if it needs to be
serviced.
(A)
Clip
(B) Fixing bracket
(C) Screw
o
You should insert a clip (A) into the holes which are located in
each corner of the hob.
o
Place the fixing brackets (B) over each hole and clip, and then
place a screw (C) through the hole and fixing bracket (B) .
Tighten the screws a little way, so that they stay in place.
IMPORTANT: Do not tighten the screws fully.
o
Carefully turn the hob back over and then gently lower it into the
aperture hole that you have cut out.
o
On the underneath of the hob,
locate the fixing brackets
(B) and
turn them so that they locate on
the underneath of the worktop
and the hob.
o
Fully tighten the screws (C) to
secure the hob into position.
21