Baumatic BECW600, Руководство пользователя, Страница: 25 / 36

25
8) Insert rawl plugs into all of the holes that you have drilled.
IMPORTANT: Rawl plugs are provided to secure the hood to
most types of walls and ceilings. However a qualified
technician must verify the suitability of the materials, in
accordance with the type of wall and ceiling. The wall and
ceiling must be strong enough to take the weight of the hood.
9) Fix the wall bracket to the wall using the three 4 mm x 30
mm screws supplied. These screws MUST BE fully tightened.
10) For the sloped cooker hood models only, additionally you
should screw four 4 mm x 30 mm screws into the anchoring
holes that you drilled out in step 7. These screws should not
be fully tightened at this stage and 10 mm left protruding
from the wall.
11) Hang the hood onto the wall bracket, ensuring that it
locates securely into the slots in the rear of the cooker hood
body.
12) For the sloped cooker hood models only, the hood needs to
be located onto the protruding screws that you fitted in step
10. These screws MUST NOW BE fully tightened.
Connecting to external ducting
13) If you wish to fit a 150 mm ducting hose to the appliance,
then you may connect this directly to the circular opening on
the top of the cooker hood. If you wish to fit a 125 mm
ducting hose to the appliance, then you must fit the 150 to
125 mm reducer.
14) Ensure that the circular non return flap which sits in the
outlet at the top of the cooker hood is in position before
connecting the ducting hose.
15)
Fit the ducting hose to the appliance (please note that the
ducting hose is not supplied).
16) The other end of the ducting hose should be connected to
a discharge outlet that is suitable for cooking vapours. It
should have a cross section of at least 150 cm².
17) The maximum distance between the coupling and your
discharge outlet should be 3 metres, with one 90 degree
bend. For each additional 90 degree bend, the maximum
distance is reduced by a further metre.