Baumatic BEC2.1SS, Инструкция по эксплуатации

Страница: 27 / 36

Installing the coffee machine into the kitchen cabinet
o
Ensure that the aperture that you will be fitting the coffee
machine into is of the size given in the above diagram.
o
Ensure that the rear panel of the furniture housing unit has been
removed.
o
You must ensure that there is a hole to feed the electrical cable
through. If you are going to connect the appliance to your mains
water supply, then you must ensure that there is a hole to feed
the inlet hose through too. These steps must be done before
commencing the rest of the installation process.
1. On the base of the housing unit,
measure out a distance of 285 mm from
the front of it. You should mark this
position on either side of the base and
both sides of the housing unit.
2. On the marks that you have just made, use the
screws provided to fix a support piece to either
side of the housing unit.
27