Baumatic BDWI660, Инструкция по эксплуатации

Страница: 40 / 52

40
Connecting to the mains water supply
IMPORTANT: Do not connect the appliance to your mains
water supply using an old or an existing water inlet hose.
The inlet hose supplied with the dishwasher is the ONLY one
that should be used.
o
The inlet hose will be located inside the cabinet of the dishwasher.
o
Connect the water inlet hose to a threaded water tap that has a
3/4” thread and to the inlet hose connector on the appliance. Let
the water run to make sure the water is clear and free of impurities
to prevent blocking the inlet hose or damaging the appliance.
o
Fully tighten the inlet hose to the water tap and the dishwasher.
o
The water supply to the appliance can also be connected to the
house hot water line (centralised heating system) as long as the
temperature does not exceed 60°C. When connected to a hot water
supply, the program times will be shortened by about 15 minutes
and the wash efficiency will be slightly reduced.
Connecting to the water outlet