Baumatic BDW17, Инструкция по эксплуатации

Страница: 41 / 44

Securing the dishwasher
o
The dishwasher must be secured to the worktop, this can be
done in one of two ways:-
o
Standard worktop - Secure the dishwasher to the
underside of the worktop by using two wood screws.
o
You should screw through the holes in the brackets at the
top of the dishwasher cabinet.
o
These screws should be fully tightened.
o
Marble/granite worktop - The material of the worktop
will mean that it is impossible to put a screw through the
underneath of the worktop.
o
You should therefore attach the two brackets supplied and
then secure the dishwasher to the furniture cabinets either
side, using two wood screws.
o
These screws should be fully tightened.
Before first use
You should check the following before using the appliance for the first
time:-
o
That the dishwasher is level and fixed in position.
o
That the water tap is fully open.
o
That there are no leaks at either end of the drain or inlet hoses.
o
That the inlet and outlet hose are fully tightened.
o
That the inlet and outlet hoses are not kinked.
o
That the power is switched on.
o
That the water softener has been filled with 1 litre of water and
salt.
o
That the rinse aid dispenser has been filled.