Baumatic BCG625-BL, Инструкция по эксплуатации

Страница: 28 / 44

Electrical connection
YOUR COOKER IS INTENDED FOR FITTED AND
PERMANENT INSTALLATION.
o
Before connecting the appliance, make sure that the supply
voltage marked on the rating plate corresponds with your mains
supply voltage.
o
We recommend that the appliance is connected by a qualified
electrician, who is a member of the N.I.C.E.I.C. and who will
comply with the I.E.E. and local regulations.
o
WARNING: THIS APPLIANCE MUST BE EARTHED.
o
This appliance is supplied with a moulded plug, which must be
connected to an earthed socket.
o
If in future you need to change the fuse in this plug, then a 3
amp ASTA approved (BS 1362) fuse must be used.
o
If the earthed socket is not accessible after the appliance is
installed. Then the cooker must be wired into a 13A double pole
switched fused spur outlet, having 3 mm contact separation and
the fuse rating reduced to 3 amps. This should be placed in an
easily accessible position adjacent to the appliance. The spur
outlet must still be accessible even when your cooker is installed.
o
The wiring in the mains lead is coloured as follows:
Brown Live
Blue Neutral
Green and yellow Earth
o
As the colours of the wires in the appliance’s mains lead may not
correspond with the coloured markings identifying the terminals
in your spur box, please proceed as follows:
The brown wire must be connected to the terminal marked “L”
(live), or coloured red.
The blue wire must be connected to the terminal marked “N”
(neutral), or coloured black.
The green and yellow wire must be connected to the terminal
marked “E” (earth), or by the earth symbol, or coloured green
and yellow.
28