gas adustment
Ŷ7DNHSUHFDXWLRQVRQWKHRSHUDWLRQVDQGDGMXVWPHQWVWREHFDUULHGRXWZKHQ
FRQYHUWLQJIURPRQHJDVWRDQRWKHU
Ŷ$OOZRUNPXVWEHFDUULHGRXWE\DTXDOL¿HGWHFKQLFLDQ
Ŷ%HIRUH\RXEHJLQWXUQRIIWKHJDVDQGHOHFWULFLW\VXSSO\WRWKHDSSOLDQFH
&KDQJHWKHLQMHFWRURIWKHEXUQHUV
1
5HPRYHWKHSDQVXSSRUW%XUQHUOLGDQG)ODPHVSUHDGHU
8QVFUHZWKHLQMHFWRUXVLQJDPPER[VSDQQHUDQGUHSODFHLWZLWK
WKHVWLSXODWHGLQMHFWRUIRUQHZJDVVXSSO\
&DUHIXOO\UHDVVHPEOHWKHDOOFRPSRQHQWV
$IWHULQMHFWRUVDUHUHSODFHGLWLVDGYLVDEOHWRVWURQJO\WLJKWHQWKH
injector in place.
2
Injector
Control handle
Tap
Tap
E\SDVVVFUHZ
Ŷ'RQRWGLVPDQWOHWKHWDSVKDIW
Ŷ%HIRUHSODFLQJWKHEXUQHUV
QRWEORFNHG
Ŷ$IXOORSHUDWLRQDOWHVWDQGDWHVW
VXFKDVVRDSZDWHURUJDV
DTXDOL¿HGWHFKQLFLDQRULQVWDOOHUKDVWRPDUN³9´
RQWKHULJKW
FDWHJRU\WRPDWFKZLWKWKH
LQUDWLQJSODWH5HPRYHWKHSUHYLRXVVHWWLQJ³9´PDUN
LQWKHHYHQWRIDPDOIXQFWLRQFKDQJHWKHZKROHWDS
EDFNRQWKHWRSSODFHPDNHVXUHWKDWWKHLQMHFWRULV
IRUSRVVLEOHOHDNDJHVPXVWEHFDUULHGRXWDIWHUJDV
Ŷ$IWHUFRPSOHWLQJFRQYHUVLRQ
VHWWLQJ
GHWHFWRU
Tuurn the taps down to minimum
R
Remove the knob from the tap and place a small
‐
‐
‐
turning
does then remove the control knob and make further
from maximum flow to minimum flow. If it
Adjustmen
nt of minimum le
evel of the flame
e
bladed screwdriver in the centre of the tap shaft.
The correct adjustment is obtained when the flame
has a length of about 3 - 4 mm.
/
must be tightly screwed in.
For butane propane gas, the adjusting screw
Refit the control knob.
ake sure that the flame does not go out by quickly
M
adjustments
to
the
gas
flow,
testing
it
again
once
the
adjustment
has
been
made.
Repeat
this
process
for
each
one
of
the
gas
taps.
RQWKHULJKW
gas
conversion.