Baumatic BAO6009-P, Инструкция по эксплуатации

Страница: 21 / 30

20
Cleaning and maintenance
Pyrolytic cleaning
o
IMPORTANT: All accessories must be removed from inside
the oven before commencing the pyrolytic cleaning
function.
o The oven should not be left unattended when the pyrolytic
cleaning cycle is in progress.
o All major food residues must be removed from the oven
before starting this function.
o
Select the pyrolytic cleaning function by turning the oven
function selector knob to the cleaning symbol
o
After turning the selector knob to this function, a cleaning period
of 90 minutes is automatically set. This should be sufficient if the
pyrolytic cleaning cycle is completed on a weekly basis.
o
The length of cleaning cycle can be increased by pressing the
manual operation button and then pressing the timer plus
button. This may be necessary if the oven is heavily soiled.
o
On this oven function it is possible to increase the oven
temperature to 475°C; you should do this by turning the
thermostat control knob to its maximum setting.
o
The oven door will automatically lock when the temperature
inside the oven reaches 300°C. When this happens, the oven will
give off an acoustic signal and a light on the control panel will
light to indicate that the door is locked.
o
During pyrolytic cleaning, the oven light will remain on.
o
After the set time period has elapsed, the oven door will remain
locked until the oven temperature has fallen below 300°C.
o
When the oven has reached a warm temperature, you should
use a soft damp cloth to wipe out the resultant ash deposits. For
best cleaning results, you should not allow the oven to get
completely cold before wiping away the ash deposits.
o
When the pyrolytic cleaning cycle has completed, the oven will
switch off and an alarm will sound. The word AUTO will flash and
the heating symbol will disappear.