background image

Using a specialist hob cleaner 
 

It is possible to purchase specialist ceramic hob cleaner/conditioner. 
 
You should follow the instructions given by the manufacturer of the 
specialist ceramic hob cleaner. You should ensure that it is suitable for 
use on your appliance. 
 

Maintaining the solid plates 
 

o

 

If something is spilt onto the plate itself, then it can be removed 
using a soft brush, plastic or nylon scourer and warm water.

 

 

o

 

To keep the solid plates in good condition, you should put a little 
olive oil onto a kitchen towel and rub it onto the surface of the 
plate. The next time the plate is used, then it may produce a 
little smoke.

 

 

o

 

Alternatively you can use a hotplate conditioner; these products 
can normally be found at larger supermarkets and hardware 
stores. The manufacturer’s instructions should be followed when 
using these products.

 

 

o

 

IMPORTANT: If the solid plates are not maintained 
regularly with olive oil or a hotplate conditioner, then they 
may rust. 

 

Installation 

 

The installation must be carried out by a suitably 
qualified person, in accordance with the current 
version of the following. 
 

 

o

 

UK Regulations and Safety Standards or their European 
Norm Replacements. 

 

o

 

Building Regulations 

(issued by the Department of the 

Environment). 

 

 

o

 

Building Standards

 (issued by the Scottish Development 

Department). 

 

o

 

IEE Wiring Regulations.

 

 

 

o

 

Electricity At Work Regulations.

 

 

 

13

Содержание B54SS

























Отзывы: