Baumatic B40DSS, Руководство пользователя

Страница: 24 / 41

23
Using the twist ice maker
o
The twist ice maker has to be manually filled with water. To do
this you should pull out the top drawer to allow access, or if
preferred you can remove the ice maker from the drawer, and
then fill it with cold, drinkable water.
o
You should be careful not to
over-fill the ice maker as the
excess water will quickly turn
to ice. You can use the small
jug provided to help reduce
spillage.
o
Once the water has formed
into ice cubes, you should
then press down the lever on
the front of the ice box to
deposit ice into the ice cube
storage section below.
o
Once ice has been deposited, you can then refill the twist ice
maker with water.
o
You should clean the ice cube storage case regularly using warm
water. The ice maker can be removed from the freezer drawer
and the top cover can be removed from the ice maker to aid in
cleaning. You should dry the ice cube storage section
thoroughly.
o
If you are not going to use the ice cubes contained in the ice
cube storage section for a long period of time, then you should
clear the remaining ice cubes.
Normal operating noises
Ice cracking noise
o
Can be heard during the automatic defrosting process.
o
Can be caused by expansion and contraction within the icebox.
Short cracking noise
o
Can be heard when the thermostat turns the compressor on and
off.