(A)
Clip
(B)
Fixing
bracket
(C)
Screw
o
You should insert a clip
(A)
into the holes which are located in
each corner of the hob.
o
Place the fixing brackets
(B)
over each hole and clip, and then
place a screw
(C)
through the hole and fixing bracket
(B)
.
Tighten the screws a little way, so that they stay in place.
IMPORTANT:
Do not tighten the screws fully.
o
Carefully turn the hob back over and then gently lower it into the
aperture hole that you have cut out.
o
On the underneath of the hob,
locate the fixing brackets
(B)
and
turn them so that they locate on
the underneath of the worktop
and the hob.
o
Fully tighten the screws
(C)
to
secure the hob into position.
21
Get user manuals:
