background image

Raised Attachment

WARNING

Crushing hazard�

Raised, unsupported stump grinder can 

fall, resulting in death or serious injury�

Never enter the area under a raised stump 

grinder unless properly supported�

 

A raised stump grinder can lower unexpectedly, 

resulting in death or serious injury.

NEVER enter area under a raised stump grinder 

unless stump grinder is properly and safely 

supported.

Lower stump grinder to ground, engage parking 

brake, shut off engine and remove key before 

servicing.

Avoid Loud Noise

WARNING

Prolonged exposure to loud noise can 

cause impairment or loss of hearing�

Wear a suitable hearing protective 

device such as earmuffs or earplugs 

to protect against objectionable or 

uncomfortable loud noises�

Hazards From Modifying 
Equipment

Do not make any alterations to your stump 

grinder. Altering the equipment may cause unsafe 

conditions and may void the manufacturer’s 

warranty.

Avoid High Pressure 
Fluids

WARNING

Pressurized  fluids  can  penetrate  the 

skin�

Hydraulic hoses can fail from age, 

damage and exposure�

Use body and face protection while 

searching for leaks� A tiny, almost 

invisible leak can penetrate the skin, 

thereby requiring immediate medical 

attention�

Use wood or cardboard to detect 

hydraulic leaks, never use your hands�

Escaping fluid under pressure can penetrate the 

skin causing serious injury.

Prevent the hazard by relieving pressure (See skid 

steer Operator’s Manual.) before connecting or 

disconnecting hydraulic lines. Verify all connections 

are tight before applying pressure.

Search for leaks with a piece of cardboard or wood.

Protect hands and body from high pressure fluids. 

If an accident occurs, see a doctor immediately. 

Any fluid injected into the skin must be surgically 

removed within a few hours or serious infection 

may result.

6

Содержание STUMP BLASTER S24





































Отзывы: