^
^
DANGER
Prevent electrocution�
Death or serious injury can result if
equipment comes near or contacts
power lines�
Electrocution can occur without direct
contact�
Check clearance before raising equipment.
DO NOT leave the operator’s seat if any part of the
equipment contacts electric lines or cables.
1.
Verify all reflectors and Slow Moving Vehicle
(SMV) sign are visible.
2. Verify hydraulics are disengaged.
3. Carry auger drive low. It may be necessary to
remove auger before transporting.
4. Travel at a reasonable and safe speed.
^
WARNING
Prevent bodily injury from rotating
auger�
Disengage hydraulics before
transporting�
5�6 Transporting
^
WARNING
Prevent injury from rotating auger�
Do not rotate auger while auger is out of
the ground�
Never approach auger before auger has
come to a complete stop�
Never operate auger drive when other
people are in the vicinity�
^
^
DANGER
Prevent electrocution�
Death or serious injury can result if
equipment comes near or contacts
power lines�
Electrocution can occur without direct
contact�
First, operate all functions in a clear area with
power unit at idle speed to get a good feel for the
controls before you attempt to dig holes.
Do not dig in an area where there are buried
obstacles. Buried concrete, rocks, roots or other
objects can produce shock loads or binding and
cause failures.
5�7 First Time User Tips
17
