Baumalight MS348 Скачать руководство пользователя страница 5

2.2 Operational Hazards

 

WARNING

Prevent serious injury or death�

Read and understand this manual before 

operating brush mulcher�

Always stop engine and remove key 

before leaving operators seat�

Never allow anyone near the brush 

mulcher during operation�

Travel at a safe speed�

 

WARNING

Prevent serious injury or death from 

moving parts�

Moving parts can crush and dismember�

Do not operate without guards and 

shields in place�

Disconnect and lock out power source 

before adjusting or servicing�

WARNING

Use brush mulcher only for the designed 

applications� 

Any other use may result in personal 

injury, damage to equipment and may 

void the warranty�

 

WARNING

Prevent serious injury or death� 

Verify brush mulcher is attached to skid 

steer before operation or transport�

 

WARNING

Protect from flying debris.

Wear proper safety glasses, goggles, 

or  a  face  shield  to  protect  from  flying 

debris�

Carefully read all safety messages in this manual 

and on equipment safety signs. Keep safety signs 

in good condition and replace missing or damaged 

safety signs.

New equipment components and repair parts must 

include the current safety decal. 

Learn how to properly operate equipment. 

NEVER operate or work around this equipment 

without proper instruction, while fatigued or under 

the  influence  of  alcohol,  prescription  or  non-

prescription medication or if feeling ill.

Keep your equipment in proper working condition.

Know the regulations and laws that apply to you 

and your industry. This manual is not to replace 

any regulations or laws. Additional information 

may be found at:  www.asae.org or www.osha.gov.

If you do not understand any part of this manual, 

contact Baumalight at 866-820-7603.

3

Содержание MS348





























Отзывы: