• First, operate all functions in a clear area with
the tractor at idle speed to get a good feel for
the controls before you actually move into any
brush.
• Choose low density brush and move into it
slowly, do not expect to get the first area done
fast.
• Slow travel speed if engine bogs down. Doing
this will greatly reduce rotor jambs, and with
practice, will almost eliminate jambs.
• Run throttle only at half speed for starters, this
will ensure that you do not activate the slip
clutch.
• If the slip clutch does activate cool it to normal
temperature before resuming operation (with
water). A hot clutch will never grip and melts
down fast.
• Operate with mulcher slightly raised until you
have a better feel how much the unit can take.
^
WARNING
Always turn off the tractor and disengage
the PTO drive before getting off the seat
and approaching the cutting wheel�
^
WARNING
Wear an approved respirator (N95 Type
as a minimum)�
Follow local, state and federal
regulations�
The health effects from exposure to
wood dust are due to chemicals in the
wood or chemical substances in the
wood created by bacteria, fungi, or
molds�
4.9 First Time User Tips
4.10 Field Operation
^
WARNING
Entanglement in a rotating drive line
can cause serious injury or death�
Keep tractor shields and drive line
shields in place at all times� DO NOT
operate without drive line guards�
DO NOT wear loose fitting clothing.
^
WARNING
Prevent serious injury or death caused
by unexpected movement:
1�
Park tractor on a level surface�
2�
Engage tractor park brake�
3�
Disengage PTO�
4�
Shut off engine and remove key�
^
WARNING
Never operate brush mulcher when
other people are in the vicinity�
Do not allow riders on tractor�
^
WARNING
Clean machine thoroughly before
service or maintenance procedures�
The health effects from exposure to
wood dust are due to chemicals in the
wood or chemical substances in the
wood created by bacteria, fungi, or
molds�
15