background image

^

 WARNING

Drilling, sawing, sanding or machining 

wood products can expose you to wood 

dust, a substance known to the State of 

California to cause cancer�  

Avoid inhaling wood dust or use a dust 

mask or other safeguards for personal 

protection�  For more information go to 

www�P65Warnings�ca�gov/wood�

^

 WARNING

Wear an approved dust mask or 

respirator�

Follow local, state and federal 

regulations�

Although the brush mulcher has been carefully 

inspected and checked prior to shipment from 

manufacturer, it is recommended that the unit be 

thoroughly inspected.

Check all bolts for tightness and remove all 

shipping tags, bags, skids, and blocking. 

Review and understand this manual and operating 

unit manual.

Remove  any  masking  materials  affixed  during 

painting. Inspect the mulcher and any accessory 

equipment to verify that nameplates and all safety 

warning, caution signs and decals provided with 

the equipment are in place and clearly visible.

Visually inspect the unit before each start up. 

Check for loose or missing parts and any damage 

that may have occurred during moving or shipping.

Review all skidsteer pre-start instructions, and be 

sure that all recommended steps and procedures 

have been followed. 

5 OPERATION

5�1 Preparation For Use

Note:

 Always keep the weight of the machine in 

mind.  Never position body in line of impact.

12

Содержание iMS760

































Отзывы: