Baumalight DR444, Руководство оператора, Страница: 15 / 28

1.
Verify all reflectors and Slow Moving Vehicle
(SMV) sign are visible.
2.
Raise tree spade slightly off ground.
3.
Verify hydraulics are disengaged.
4.
Travel at a reasonable and safe speed.
4�6 Transporting
4�5 Pre-Operation Check List
• Verify that tree spade is properly attached to
skidsteer.
• Verify that hydraulic hoses and electrical cable
(if equipped) are properly connected.
• It is operators responsibility to perform
the following checks prior to operation of
equipment.
• Review and understand this manual and
operating unit manual.
• Verify safety decals are installed and
legible. Replace if damaged or missing.
• Verify that all hardware is tight.
•
Inspect hoses and fittings for wear, damage
and leaks. Replace damaged or leaking
hoses before use.
• Verify that local utilities have marked all
underground wires, cables and pipelines.
• Refer to operating unit operator’s manual
for prestarting instructions.
4�7 Detach Tree Spade
^
WARNING
Prevent serious injury or death�
1�
Park machine on firm, level surface.
2�
Engage parking brake�
3�
Disconnect hydraulic drive�
4�
Shut off engine and remove key.
1.
Park on a level surface.
2.
Lower tree spade to the ground.
3.
Shut off engine and remove key.
4.
Disconnect hydraulic hoses and electrical
harness (if equipped).
5.
Detach tree spade from skidsteer. See
Operator’s Manual
.
4�8 First Time User Tips
• First, operate all functions in a clear area with
throttle at low idle to get a good feel for the
controls.
• Move the tree spade slowly until you have a
better feel how much the unit can take.
• Each operator must experiment to find
a technique that works for them in their
application.
^
WARNING
Always shut off engine before getting
off the seat.
13