1.
Read ALL safety instructions.
2.
Verify hydraulic lines are clear of pinch areas.
3.
Verify there is sufficient visibility and
maneuverability to move up to the cutter.
4.
Verify pins are secure in the correct position.
5.
Attach skid steer to cutter. See skid steer
Operator’s Manual.
6.
Connect hydraulic hoses.
7.
Move to a clear open area to test functions.
^
WARNING
Never position unit so that rotating
blades are visible to operator�
4�5 Attaching/Detaching
Traveling at slower speeds will provide more
efficient performance.
Operate in slightly rolled back possession, this
leaves more room for discharge allowing more
tolerance for an unskilled operator.
^
WARNING
Turn off engine and remove key before
leaving operator’s seat�
^
WARNING
Drilling, sawing, sanding or machining
wood products can expose you to wood
dust, a substance known to the State of
California to cause cancer�
Avoid inhaling wood dust or use a dust
mask or other safeguards for personal
protection� For more information go to
www�P65Warnings�ca�gov/wood�
^
WARNING
Wear an approved dust mask or
respirator�
Follow local, state and federal
regulations�
4�6 First Time User Tips
10
