Baum VisioDesk, Руководство пользователя

Страница: 11 / 36

Camera positions 11
5 Camera positions
After unfolding VisioDesk, the camera can be pivoted to 4 positions. The
close up lens will slide in automatically if required.

Snap in position directing straight down on ground plate. For viewing
small objects.

The next snap in position is the normal reading position. The camera
unit is tilted slightly to the front. This is for normal reading (any image
distortion will automatically be corrected as the autofocus takes
effect). The camera looks toward the front edge of the base. In other
words, if you put a page on the base, the camera will look at the
bottom of the page. Thus by moving the paper (up, down, left, right),
you can read the entire page.

Far view position to the front, camera facing away from user, for
reading from a black board etc. Camera does not snap in allowing you
to adjust viewing angle.

Mirror position. Pull display down below camera and pivot camera
window to front, so your face will be shown on display. This position
also does not snap in.

The third snap in position is the transport position. Camera faces
down parallel to the arm. Wen folded shut, the two rubber straps on
camera will rest on the base, preventing it from scratches.