GB
Appliance, alarm and malfunction symbols
Party mode
To select the function, keep pressing the menu
button until the display shows the party mode
symbol
.
The symbol flashes, press “OK” to confirm.
Use this function to chill drinks inside the freezer
compartment. When the function is in operation,
the symbol is animated. 30 minutes after selection
(the time required to chill a 0.75 l bottle without the
glass breaking), the symbol flashes, an acoustic
alarm sounds and the display lights up: remove the
bottle from the freezer compartment and press the
“OK” button to disable the function.
Important:
do not leave the bottle inside the
freezer compartment longer than the time
necessary for chilling.
“6th Sense” function
The 6th Sense function is automatically activated
when:
•
a large amount of food is loaded into the
refrigerator and/or freezer
•
the refrigerator and/or freezer door is left open for
a long time
•
a prolonged power failure takes place, causing the
internal temperature of the appliance to increase to
values that cannot guarantee safe storage of food.
The symbol flashes for approximately 3 seconds,
after which it remains permanently lit until optimal
storage conditions have been automatically restored.
Control panel lock function
This function prevents anyone from inadvertently
changing settings or switching off the appliance.
To lock the control panel, press buttons “+” - “OK” -
“-” at the same time for 3 seconds until the display
shows the symbol
: an acoustic signal confirms
the function has been selected. To disable the
function, follow the same procedure until the symbol
switches off.
Alarms
In the event of an alarm, the acoustic alarm and
indicator lights are activated.
Freezer temperature alarm
The acoustic alarm sounds: alarm symbol lights up
and the temperature indicator flashes.
The alarm is activated when:
•
The appliance is connected to the power supply for
the first time or after prolonged disuse
•
The freezer compartment temperature is too high
•
The quantity of foods loaded into the freezer
exceeds that indicated on the data plate
•
The freezer door has been left open for a long time
Note:
in these cases automatically appears on the
display
Power failure alarm
The maximum temperature reached during a power
failure flashes on the freezer display. The alarm
symbol lights up and the acoustic alarm sounds at the
same time. This alarm may activate when:
•
There had been a prolonged power failure, and the
freezer internal temperature rose to the level that
does not guarantee appropriate food storage
conditions.
To disable the alarm press “OK”, after which
the pre-set temperature will appear on the
display.
Note:
evaluate the state of the stored food.
Operation alarms
In the event of operation alarms, other alarms will
also be displayed in the refrigerator or freezer
compartment, depending on the malfunction site,
(e.g. CF, AL01, AL02, AL03 or AL04 etc...) call After-
sales Service and specify the alarm code.
Refrigerator door open alarm
The refrigerator door symbol lights up and the
acoustic alarm sounds. The alarm is activated when:
•
the refrigerator’s door is left open for more than 2
minutes. Press “OK” to mute the acoustic alarm.
If the door is not closed, the acoustic alarm will
sound again after two minutes. Close the door/s and
press the “OK” button.
Note:
in these cases 6th Sense automatically appears
on the display
Malfunction and After-sales Service symbol (Call
After-sales Service)
Function indicating the necessity to replace the
filter
The replacement of the filter is described on the first
page of this Product Sheet.
After connecting the appliance, the three-segment
icon is displayed.
The segments will sequentially go off:
- after 2 months
- after 4 months
- after 6 months
After 6 months of operation, the alarm icon
and
icon will be displayed, indicating that it is
necessary to replace the filter. After replacing the
filter, keep the “OK” button pressed for about 5
seconds, until the alarm icon
goes off and the
three-segment icon reappears. It is possible to
switch the icon off until the filter is replaced (for
about 6 hours) by pressing the “OK” button.
Cleaning
Press the Stand-by button, which allows you to
switch off the refrigerator compartment alone,
keeping the freezer on. The refrigerator
compartment can now be emptied and cleaned.
Содержание KGNA 336 OPTIMA
Страница 6: ......