Bauknecht KGNA 335 Скачать руководство пользователя страница 3

5019 637 01004

CONTROL PANEL DESCRIPTION

ELECTRICAL CONNECTION

Compartments ON / OFF, menu, selection and 
confirmation buttons
1. 
Refrigerator compartment Stand-by - ON/OFF 

button

2. Menu button
3. Appliance ON/OFF button
4. Selected compartment temperature increase 

button

5. Confirmation button
6. Selected compartment temperature decrease 

button.

Functions and settings symbols

Functions and settings for the refrigerator 
compartment

 

Appliance, alarm and malfunction symbols

!

Functions and settings for the freezer 
compartment

Switching on the appliance: Press the On-Off button
Switching off the appliance: Press the On-Off button again
Adjusting the temperature: To change the temperature inside the refrigerator or freezer compartment, press 
the Menu button until the refrigerator or freezer temperature symbol turns on (symbol flashes).
Then adjust the temperature by pressing the +/- buttons and confirm by pressing “OK”.
Displaying the refrigerator and freezer compartment temperatures.
The temperature inside the refrigerator compartment can be adjusted b2°C and + 8°C. In the same way, 
the freezer compartment temperature can be adjusted between -16°C and -24°C.

When the appliance is connected to the power supply, the display lights up and all the symbols appear on the display 
for a few seconds.
The factory setting -18°C appears and flashes, the symbol 

 lits, while the refrigerator display shows a 

temperature of +5°C (factory-set).

While the appliance is working to reach the factory-set temperature, the alarm icon lits 

, an acoustic alarm 

sounds and temperature symbol on the freezer display flashes (- -). This indicates that the appliance has not yet 
reached the optimal temperature for storage of foodstuffs.

Press and hold the button 

 until the acoustic alarm disables.

The icon 

 disappears when the freezer compartment reaches a temperature below -12°C, the display will show 

the temperature -18°C, at which point food can be loaded into the freezer compartment.
After being switched on, the refrigerator needs from 2 to 3 hours to reach the correct temperature to store a typical 
volume of food in the refrigerator compartment.
IMPORTANT:

If food is placed in the refrigerator before the appliance has cooled completely, it may deteriorate.

Turning the refrigerator and freezer controls to a cooler than recommended setting will not cool the 
compartments any faster.

A built-in exterior moisture control continuously guards against moisture build-up on the front edges;

Do not be alarmed if these edges sometimes feel warm to the touch.
The inside light switches on when the refrigerator door is opened. After 10 minutes of door opening the light 
switches off.

Содержание KGNA 335



















Отзывы: