29
FREEZER SLIDING DRAWER
• The freezer compartment of your product is
provided with a sliding drawer to facilitate access
to food. It also allows for better use and
organization of the freezer internal room.
CLEVER-ICE WITH FEEDER
• Your refrigerator is provided with an ice-making
system comprised of a feeder, ice trays with
extractor and an ice bin. With this system, it will
be easier to fill the trays with water, extract the
ice cubes and store them.
The feeder facilitates filling the trays with water as
you will not have to take them to the freezer,
avoiding occasional water droplets on the kitchen
floor.
How to fill ice trays with water:
• Before filling the trays with water, clean them as
in “Cleaning”.
• Remove the feeder from the support, pulling it
frontward.
• Fill it up with water without resting it on a surface
and replace it on the support. The water will
automatically fill the ice trays.
•
• Allow some hours for the ice to form, and then
turn the buttons to extract the ice. The ice cubes
will fall straight into the ice bin.
Important:
• Make sure there is no ice in the trays before
reloading the feeder.
• Before reloading the feeder, check whether
there is ice on the springs, remove with running
water if necessary.
• If you need more storage room in the freezer,
you can remove the movable parts of the ice
system.
THREE-STAGE SHELF
(Present on control on the door models)
This shelf provides greater flexibility when storing
foods in the freezer compartment of your
refrigerator. You may use it in the following
positions:
• Full-width position.
• Half-width position. Only push the front of the
shelf backward.
• Tilted position. Turn the shelf upward until it
touches the back of the freezer compartment.
• To remove the shelf, place it in the half-width
position and push the back of the shelf upward
until it is released.