BAUKER CHT18LW, Оригинальное руководство пользователя

Страница: 13 / 18

EN-13
WARNING!
If any parts are missing, damaged or broken, do not operate your hedge
trimmer until all damaged parts have been replaced or repaired. Failure to do so could
result in serious personal injury.
IMPORTANT TIPS FOR TRIMMING HEDGES
●
Assume secure posture and hold Trimmer with both hands. If using a step ladder make sure it is
securely located and if working high tie the ladder to the thicker inner branches of the hedge.
●
Ensure no people or animals are in the work area.
PAY ATTENTION TO USE YOUR HEDGE TRIMMER
●
Inspect the area to be cut before each use, remove objects which can be thrown or become entangled
in the cutting blades.
●
Always hold the Hedge trimmer with both hands and with the blade away from you before turning it on.
●
When trimming new growth, use a wide sweeping action so that the stems are fed directly into the
blade.
●
Allow the cutting blades to reach full speed before entering the material to be cut.
●
Always work in the direction going away from people and solid objects such as walls ,large stones,
trees, vehicles etc.
●
If the blade jam, immediately stop the Hedge trimmer. Remove the battery pack and clear the jammed
things from the cutting blade.
●
Wear gloves when trimming thorny or prickly growth.
●
Move the Hedge trimmer to feed the branched directly into the blade cutting edges.
●
Do not try to cut stems that are too large to feed into the cutting blades.
TOP CUTTING (See FIG.E)
Use a wide sweeping motion. A slight downward tilt of the cutting blades in the direction of motion
gives the best cutting results.
SIDE CUTTING(See FIG.F)
When trimming the sides of the hedge, begin at the bottom and cut upwards, tapering the hedge
inward at the top. This shape will expose more of the hedge, resulting in a more uniformed growth.
MAINTENANCE AND STORE
WARNING! Always remove the plug from the electrical socket before clean or repair.
1) Never use water to cleaning the unit.
2) Always clean the hedge trimmer immediately after use. Brush the blade using a stiff nylon brush to
remove any debris.
3) Always store the unit in a dry place.
4) Inspect the hedge trimmer before each use.
5) Have the unit professionally repaired if any damage occurs.
6) The blade rail should be cleaned and treated with fine oil after each use.
7) Use the blade guard for transportation and storage.