Bauhn PA39085, Инструкция по эксплуатации

Страница: 8 / 16

8
After Sales Support - Help Desk
Telephone: 1300 663 907
Internet: www.winplus.com.au
Product Setup
Connecting Appliances
1. Remove the clear tab at the rear of the product, to activate the internal
batteries.
2. Plug the power meter into the mains socket.
3. Plug the appliance you wish to monitor into the front socket of the
power meter.
4. Switch the mains socket power switch to “ON”.
5. Use the appliance as normal - the power meter will now monitor the
energy used by the appliance.
Tip: The internal batteries will allow you to set the Power Meter
functions before plugging into mains power.
Setting the Time
1. Press and hold the “CLOCK” button for 3 seconds.
2. With the hour digit flashing, press “UP” repeatedly until the correct hour
is reached; Time is always displayed using the 24 hour clock, so 2:00pm
must be entered 14:00 for correct operation.
3. Press the “SET” button to accept the hour selection.
4. With the minute digits flashing, press “UP” repeatedly until the correct
hour is reached.
5. Press the “SET” button to accept the minute selection.
6. Wait 10 seconds, or press the “OK” button to finish setting the time.