distance within 80CM for better sound reception.
Under the phone conversation, double press the
button can switch sound output
between the speaker and phone.
Voice Guide
The speaker with the voice guide: Bluetooth Mode, Aux In Mode, Device paired ,
Device Disconnected,Out of Battery.
Aux In
Use the 3.5mm audio cable included to connect the speaker to an audio source (PC,
MP3/MP4, mobile phone). The speaker will disconnect the Bluetooth pairing
automatically and enter
“
AUX IN
”
mode (the speaker will prompt
“
Aux in mode
”
). The
speaker will play the music from the audio source.
Charging
Please charge the speaker immediately when the speaker prompt the
“
Out of
Battery
”
.Use the USB cable included to connect the speaker to a branded good quality
5V/2A adaptor to charge the battery.
When charging, the orange LED indicator is on
When speaker is fully charged, the battery indicator is off
Please note:
◆
Do use the good quality adaptor
◆
When the speaker prompt
“
Out of Battery
”
, the volume will decrease
automatically to protect the speaker
’
system. Please charge the speaker
immediately. And increase the volume manually.
◆
Not recommend to use PC USB port to charge the speaker as the computer
USB power supply is weak.
Automatic Power Saving Function.
The M600D speaker will enter the standby status when not working after 10 minutes later
(in below modes).
The speaker will enter the standby mode when Bluetooth disconnection after 10 minutes.
The speaker will enter the standby mode when pause/mute after 10 minutes.
Troubleshooting
What should I do if the speaker can not pair with the Bluetooth device and play
music accordingly?
Please check the specification/ the manual of the Bluetooth device (your mobile or
computer), and check if the device can support the A2DP stereo audio transmission.
If yes, please turn on the A2DP stereo mode.
If there are too many Bluetooth devices, it may not easy for the speaker to be
searched, please turn off other Bluetooth device.
Please try use the reset slot
