Cordless Headphones
5.
Select Channel
Select the channel you wish to use for your
Cordless Headphones. The switch used to toggle
between channels 1 to 3 is found on the rear of
the base unit.
Note: Change channels if you experience
interference or have multiple sets of headphone
s.
6.
Scan for Channel
Press the Scan button on the side of the right ear
pad to scan for the channel you selected.
You may need to press scan a few times to tune
to the correct channel.
Congratulations, your Bauhn Cordless Headphones are ready to use.
4.
Connect Audio to Base
Connect the base unit to your audio device
via either the RCA cables or 3.5mm audio cable.
The LED on the front of the base unit will turn green
when it detects audio input.
Tip: If the green LED does not light up, ensure
the volume on your device is set to maximum.
