4.
CONNECT AUDIO TO BASE
Connect the base unit to your audio device via either the RCA cable or 3.5mm audio cable.
The LED on the front of the base unit will turn green when it detects audio input.
NOTE:
• If the green LED does not light up, ensure the volume on your device is set to
maximum.
• Your Cordless Headphones connect wirelessly via UHF (Ultra High Frequency) to
the base unit, not via Bluetooth or Wi-Fi
5.
SELECT CHANNEL
Select the channel you wish to use for your Cordless Headphones. The switch
used to toggle between channels 1 to 3 is found on the rear of the base unit.
NOTE:
Change channels if you experience interference or have multiple sets of
headphones in use within range.
6.
SCAN FOR CHANNEL
Press the “S” button on the side of the right ear cup to scan for the channel you
selected.
You may need to press scan a few times to tune to the correct channel.
Congratulations, your Bauhn Cordless Headphones are ready to use.
After Sales Support 1300 663 907
www.winplus.com.au
Getting Started Guide
.
