Bauhn HE21404, Инструкция по эксплуатации

Страница: 11 / 16

11
After Sales Support - Help Desk
Telephone: 1300 663 907
Internet: www.winplus.com.au
5. Tighten the bolts to secure the antenna in place. Ensure you tighten the
wing nuts at the same rate to balance the mounting attachment.
Plugging in the Antenna Cable
The Bauhn Outdoor Antenna Kit includes a 12m F-Type Coaxial Cable. This
is a common antenna cable and is suitable for most houses and installation
scenarios. Should you require a longer cable, contact your local electrical/
electronic supplier.
1. Connect the end of the antenna cable with the socket protector to the
connection on the outdoor antenna. Take care not to bend or damage
the pin in the centre of the cable.
2. Screw the connection firmly to the antenna and cover the cable with the
socket protector. This will help protect the connection from the weather.
Note: When the antenna is mounted horizontally the connection should
be underneath the antenna for better protection from weather.
Running the Antenna to your TV
1. The coaxial cable connection on the end of the antenna cable is a male
PAL connection. This is a common antenna connector for most TVs and
home theatre systems. Should you require an adapter to connect to your
device, contact your local electrical/electronic supplier.
2. Once the antenna has been mounted and the antenna cable has been
connected to the antenna you can connect the cable to your TV or home
theatre system.
3. Run the cable to your TV or home theatre system.
4. Plug the male connection into the female connector on your TV or home
theatre – this is usually found at the rear of your TV or amplifier.
Note: It is recommended you check the reception using your TV before
you mount the antenna permanently. Ensure the 12m cable will reach
your TV from where you the mount antenna.