Bauhn freeview AP-HDF1S, Инструкция по эксплуатации

Страница: 10 / 20

After Sales Support TEL: 1300 886 649
9
, select PAL for Australia.
(refer to page 12).
4.1.5 Change Password
You can set a password for anyone who wishes to operate in the”Sytem Setup”menu. And you can
also set the password for the lock channels. (How to set the lock channel please refer to Lock) Here
will show you how to setting and how to revising the password.
1. In “Change Password”function, press key, there will pop a dialogue for you to input the password.
The default password is “0000” When you input the correct password, you will see a screen like
below.
2. New Password is used for revising password, you can press [OK] key firstly then input the new
password in this item by using number keys directly. After you filled in 4 digital numbers, the
highlight will auto skip to Confirm Password and ask you to input the new password again. If the
password is correct, the screen will show up a message of “change password successfully”. draw
back to “system Setup”menu, the revising is complete.
3. Press [Exit] key to draw back from the “Change Password”menu.
4.1.6 System Information
Select this can display the system information.
4.1.7 Factory Reset
Use this option if you encounter a problem after having changed some parameters. This option will
reset the unit’sdata to restore it to the factory’s value, thus deleting all channels. You will need to
scan all Channels Afterwards.
4.2 Video Setting
Press [Menu] key on the RCU, the main menu will be shown on the screen.
1. Select an option by pressing the UP and DOWN keys of the remote control, and press OK keys of
the remote control to change the setting’s value, select PAL for Australia.
2. Press the button EXIT of the remote control to go back to the previous menu.