![Bauhn AWT101-215 Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/bauhn/awt101-215/awt101-215_instruction-manual_2709128008.webp)
8
1300 886 649
Model: AWT101-215 Product Code: 49311 02/2015
www.tempo.org
AUS
Getting Started
Unpacking
• This product has been packaged to protect it against transportation damage.
Unpack it but keep all packaging materials until you have made sure the
BAUHN Sphere
TM
10.1” Quad Core Windows Tablet is undamaged and in
good working order.
• The carton is recyclable. Whenever possible, reuse the carton and recycle it
when disposing of the packaging materials.
• Plastic wrapping can be a suffocation hazard for babies and young children,
so ensure all packaging materials are out of their reach. Dispose of any
plastic wrapping safely.
• Unwind the micro USB OTG cable and inspect it for damage. Do not use any
cables or the charger if any part is damaged. In case of damage, contact our
after sales support centre for advice on examination, repair or return of the
damaged product.
• Read this manual to familiarise yourself with all the features and operating
principles of your new BAUHN Sphere
TM
10.1” Quad Core Windows Tablet.
Pay particular attention to the safety instructions on the previous pages.
Micro SD Card
Your BAUHN Sphere
TM
10.1” Quad Core Windows Tablet is compatible with
micro SD cards, up to 32GB in capacity.
• Power off your MID (mobile internet device).
• Insert your micro SD card into the micro SD slot on the left side of the MID,
making sure the gold contacts are facing the rear of the MID. Gently push it
in until you feel a soft click.
• To remove the SD card, power off the MID then gently push the SD card until
you feel a soft click and the SD card will eject.
Charging the Battery
The battery in your new BAUHN Sphere
TM
10.1” Quad Core Windows Tablet has
been partially charged at the factory. To perform all functions, we recommend
you fully recharge it using the supplied charging adaptor:
• Plug the adaptor to power outlet and the small jack into the 5V DC input on
the tablet. Plug the charger into your mains power supply. When you MID
indicates a full charge disconnect the charger.
• Follow this charging procedure whenever your MID indicates a low battery charge.
NOTE:
In order to ensure normal operation of the tablet, make sure to use the
designated charger for charging the tablet.