15
1300 886 649
Model: ASBWS-0719 Product Code: 10177 07/2019
www.tempo.org
AUS
Controls and Connections (Cont.)
Wireless Subwoofer
Pair Indicator:
Solid light when pairing is successful.
Pair Button:
Connect to the main unit.
Power cord:
Connect to power.
Pairing the Wireless Subwoofer With the Main Unit
Automatic pairing
The subwoofer and soundbar will automatically pair when both units are plugged into
the mains sockets and turned on. No cable is needed for connecting the two units.
• When the subwoofer is pairing with the main unit, the Pair Indicator will flash fast.
• When the subwoofer is paired with the main unit, the Pair Indicator will light up
.
NOTE:
• Do not press the Pair button on the rear of the subwoofer, except for manual
pairing.
• If the automatic pairing fails, pair the subwoofer with the main unit manually.
Manual Pairing
1. Ensure that all the cables are connected and both the Soundbar and Subwoofer
are on.
2. Press and hold the PAIR buttons on the back of the soundbar and the subwoofer
for 2 seconds - they will clear the pairing status, and the subwoofer Pair Indicator
will blink quickly.
3. Press the PAIR button on the back of the soundbar, and the soundbar will then
auto-search for the subwoofer.
4. Once the soundbar and subwoofer are successfully paired, the subwoofer Pair
Indicator LED will illuminate.
NOTE:
If the pair indicator LED blinks, it indicates that the connection has failed.
Unplug the cable of the subwoofer and reconnect after 3 mins. Repeat steps 1-4.
NOTE:
• If the wireless connection fails again, check if there is conflict or strong
interference (for example,interference from an electronic device) around your
location. Remove these conflicts or strong interferences and repeat the above
procedures.
• The subwoofer should be within 6m of the soundbar in an open area.
• If the main unit is not connected with the subwoofer and it is in On mode, the
POWER Indicator will flash. Follow steps 1- 4 above to pair the subwoofer to the
main unit.
