2
Remove the drawers before installation.
Push the top drawer to open. Pull the
bottom drawer front to open.
Pull out fully, lift the front, pull out again,
lower and fully remove.
Step 1
Step 2
Door Unit only
Remove the door before installation.
a:
Lift the tab (shown) on all hinges,
to release.
b:
Pull door back.
Step 4
The Essence range of bathroom furniture has
been designed to be installed in either a run of
several units or as individual units.
Note:
When installing, the basin unit and basin
should be fitted first.
Typical example of a run of units
Basin &
Basin
Unit
Double
Drawer
Unit
Single Door
Unit
a
b
Step 3
Plan unit position
We suggest positioning the storage units
so they are level with any other units that
have been installed.
Option 1: ‘Hanging hooks’
Use the measurements above, to position the ‘hanging hooks’.
a:
Mark the fixing hole positions onto the wall.
Drill Ø 8mm holes, insert the wall plugs and the ‘hanging hooks’.
b:
The ‘hanging hooks’ should protrude from the wall by 5-7mm.
Position the unit on the hanging hooks.
300 Double Drawer Unit/Single Door Unit
230mm
175
mm
175
mm
430mm
500 Double Drawer Unit/Single Door Unit
Note:
The Units can be hung using one of two options, ‘Hanging hooks’ or ‘Wall brackets’ depending on your
requirements and wall structure. It is recommended to use the bracket option on non-solid walls.
175
mm
a
5-7mm
b
Drawer/Door Unit Installation -
500 Double Drawer Unit is shown as a typical example
Push to open
380mm -
390mm