Bauermanns GM010995, Руководство по эксплуатации

Страница: 24 / 36

Electrical Safety
IMPORTANT:
Make sure that the electric circuit is fused, and that the power, voltage and frequency of the motor is
supported by your mains supply. Also, make sure, that your power supply is earthed. Connect your log splitter to earth.
Never open the ON/OFF switchbox. However, if it should become necessary to do so, contact a skilled electrician.
Make sure that you will never touch live contacts, specifically when you plug or unplug your log splitter. This machine
and its power cord must never get into contact with water.
Never use its power cord to move/shift your log splitter. Always unplug the power cord before handling your log spliller.
Do not yank the plug out of the wall socket by the cable and protect the latter against heat sources, oil and objects
which can damage it. Neither expose your log splitter to rain nor to wetness.
NOTE: When equipment like this is being started a short-time voltage drop may occur, particularly if the mains quality
is poor. Such drops can affect other consumers (e.g. nickering of a lamp). At a mains impedance of Zmax < 0.448 Cl,
such trouble is not
to be expected. (For further information, please contact your local energy supply company.)
Electrical Connection
The 3 -phase 400 V/50 Hz motor of this log spliller should be connected to a standard 400 V .:!:,_ 10 %/50 Hz.:!:._ 1 Hz
power supply source provided with a residual-current circuit breaker.
CAUTION:
Any unprofessional use of extension cables can cause overheating of this log splitter. Ensure that the
extension cable is not longer than 10 m and its wire cross section is not less than 2.5 mm'. Never use uninsulated or
bare cables, respectively. The extension cable must be suitable for outdoor use.