Page 3
For technical questions, please call 1-888-866-5797.
Item 58126
Use Precautions
1.
DANGER: Keep hands away from
cutting area and the Carving Disc. Keep
your second hand on auxiliary handle,
or motor housing.
If both hands are holding the grinder,
they cannot be cut by the Carving Disc.
2.
Never hold piece being cut in your
hands or across your leg. Secure
the workpiece to a stable platform.
It is important to support the work
properly to minimize body exposure,
Disc binding, or loss of control.
3.
Do not reach underneath the workpiece
or remove wood shavings from the
cutting area while the Disc is rotating.
The safety guard cannot protect you from
the Carving Disc below the workpiece.
4. Operate a power tool equipped with
this Carving Disc with both hands only.
Using equipment with only one hand
can easily result in loss of control.
5. Do not operate a power tool equipped
with this Carving Disc near the face
or in a position above the head.
6. Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power
tool in unexpected situations.
7. Follow the manufacturer’s operating
instructions and safety warnings
applicable to your angle grinder.
8. This product is not a toy. Do not allow
children to play with or near this item.
9. Use as intended only.
10. Inspect before every use; do not use
if parts are loose or damaged.
11. Stay alert, watch what you are doing and
use common sense when operating a
power tool equipped with this Carving
Disc. Do not use while tired or under the
influence of drugs, alcohol or medication.
12. Dress properly. Do not wear loose
clothing or jewelry. Keep hair, clothing
and gloves away from moving parts.
Loose clothes, jewelry or long hair
can be caught in moving parts.
13. The warnings, precautions, and
instructions discussed in this instruction
manual cannot cover all possible
conditions and situations that may occur.
It must be understood by the operator that
common sense and caution are factors
which cannot be built into this product,
but must be supplied by the operator.